Phasing Line is a Success, Sweepstakes Too

Phasing Line Is a Hit!

Our first episode of The Phasing Line Podcast was a hit. People really seem to love the new style – at least maybe our target demographic does (younger people, sub age 40, who are already a little experienced in ham radio). I’m excited for episode 2 – if we can find the time to record. I want to shoot for a biweekly release date but Marty and I have tumultuous schedules, so that is TBD. I do want to say we are planning an interview with a rising ham, so that will be exciting!

The big takeaway from the first episode was to avoid interruptions, so that will be fixed. Marty and I both think faster than we can speak too, and the fast-paced topic jumping with tons of tangents can be decisive – some like it, some don’t. We’ll be fine tuning the podcast as it goes on.

But it was such a success that it sparked interest in an old podcast I co-hosted, the Youth in Amateur Radio Podcast (YARP). 18-year old Jacob Keogh KDØNVX has taken the lead and re-branded it to The Noisy Key (jealous of that name) which will probably be a round-table similar to ICQ podcast, perhaps a bit more focused on a single or few topics, unlike the unfiltered consciousness which is The Phasing Line. All of which is to be determined as they work bringing the first episode.

Sweepstakes at WØEEE

WØEEE had another clean sweep during the ARRL SSB Sweepstakes. I came down to help educate and train new guys on HF contesting, spending a lot of time on a whiteboard.

Here’s an album. Click on the photos to make them bigger:

All that mattered (aside from getting the sweep) was that everyone had a ton of fun. It was really great how many people showed up, showed interest, logged, and got on the air. We made 227 QSOs in all 83 sections, so we didn’t really shoot for high numbers, and our antenna system got us down, but it was still a lot of fun. I also got to work Marty twice, lol!

We had to break out the amp for the last two sections of the sweep – PAC (pacific, aka Hawaii) and AK (Alaska). They were working huge pileups since they came on very late in the contest. But, we didn’t have an interface with the FT-897…so I had to do it manually, without ALC. Luckily the SB-220 has a soft-key relay that lets you use a simple switch to key the amp instead of 120V – that would have fried everything!

It worked! Not sure how bad the signal was coming out of the amp, but I drove it clean and it seemed to be linear, haha!

WØEEE Score Summary:

Operator(s) : N0SSC, AA0RN, N0SFK, KE0CFK, Alex Hoeft

Operator Category : MULTI-OP
Assisted Category : ASSISTED
Band : ALL
Power : HIGH
Mode : SSB
Default Exchange : S 31 MO
Gridsquare : EM47CW
Name : Missouri S&T ARC
Address : 301 W 16th St
City/State/Zip : Rolla  MO  65409
Country : UNITED STATES
ARRL Section : MO
Club/Team :
Software : N1MM Logger+ 1.0.5982.0
Band QSOs Pts Sec Pt/Q
3.5 109 218 26 2
7 60 120 25 2
14 52 104 29 2
21 6 12 3 2
Total 227 454 83
Score : 37,682
Rig : FT-897
Antennas : 80m trapped dipole, 40m dipole, 80m OCFD windom 20′ above ground
*************************************************
Breakdown by Operator
*************************************************
Operator 80m 40m 20m 15m Total  Accum
AA0RN 57 23 6 86 86
ALEX 3 3 6 92
KE0CFK 18 6 24 116
N0SFR 10 10 126
N0SSC 24 34 37 6 101 227
Total 109 60 52 6 227 227
*************************************************
W0EEE Max Rates:
*************************************************
2016-11-20 0612Z – 2.0 per minute  (1 minute(s)), 120 per hour by AA0RN
2016-11-20 0623Z – 1.2 per minute  (10 minute(s)), 72 per hour by AA0RN
2016-11-20 0657Z – 0.7 per minute  (60 minute(s)), 40 per hour by AA0RN KE0CFK
*************************************************
W0EEE – Off Times >= 30 Minutes
*************************************************
2016-11-19 2100Z – 2016-11-19 2105Z     00:06  (6 mins)   (Start late)
2016-11-20 0328Z – 2016-11-20 0357Z     00:30  (30 mins)
2016-11-20 0847Z – 2016-11-20 1450Z     06:04  (364 mins)
2016-11-20 1509Z – 2016-11-20 1609Z     01:01  (61 mins)
2016-11-20 1734Z – 2016-11-20 1817Z     00:44  (44 mins)
2016-11-20 1859Z – 2016-11-20 1939Z     00:41  (41 mins)
2016-11-20 1941Z – 2016-11-20 2022Z     00:42  (42 mins)
2016-11-20 2138Z – 2016-11-20 2215Z     00:38  (38 mins)
2016-11-20 2312Z – 2016-11-21 0243Z     03:31  (211 mins)
Total Time Off 13:57  (837 mins)
Total Time On 15:47  (947 mins)
**************************************************
W0EEE Runs >10 QSOs:
**************************************************
2016-11-20 0602 – 0724Z,    3671 kHz, 51 Qs, 37.0/hr AA0RN
2016-11-20 0807 – 0824Z,    3804 kHz, 14 Qs, 50.7/hr N0SSC

 

Thanks for reading! I will follow up this with a post detailing some ideas for college clubs to increase activity, and some ideas for contest coordinators to make contests better for school clubs and younger people as well.

Response to W9WSW: Revitalizing Your College Ham Club from the Point of View of W0EEE

Go read this post.

Do it before reading this.

I hope Scott, W9WSW doesn’t mind hijacking his post, but I really think it’s one of the best guides to college ham radio clubs I’ve seen, and it was exactly how Barry KC0YDZ and I revitalized W0EEE after a four-year lull. I want to take his guide and go by the numbers with all the experience I had with W0EEE.

Scott serves the Michigan State University Amateur Radio Club W8MSU, and really leads by example. Go check out their Facebook page, twitter and website.

The list:

1. Go where the action is

Aka use modern social media tools to build an online name for yourself. It’s imperative to do this because hams going into college will search for “<college name> ham radio club” when looking for a suitable school.

Facebook. Twitter. Website. Bonus points for Instagram or Flickr or other photo joints, and YouTube.

Even with all the modern media sites, your alumni will always prefer email. Clubs should always have a newsletter or meeting minutes email sent to the alumni to remind them that their alma mater is active. This gives them a sense of accomplishment that their work in the club was worthwhile and leads to more engagement (aka donations and sponsorships) from the alumni base.

I’m only partially speaking for myself, as an alumni. When I was a member, the alum bothered me for updates. I gave in, and it was a very good thing – see the next section for why.

2. Update your shack

A basic HF station is a must-have, which means pursuing a relationship with the University facilities department to allow for an antenna (see #8.2).

Also keep your shack clean. Having a shack that looks like this might mean it’s super active, but clutter can be deterring and stress-inducing.

People are very willing to donate used equipment to clubs, so it behooves the club to follow step 1, 6, and 8 to make your alumni and community aware of your activities. It’s rarely a good idea to solicit donations (read: beg) unless you’re really pressing for equipment. We got:

  • FT-1000MP
  • FT-897
  • TS-850s
  • FlexRadio 5000A

Just from having an frequently updated alumni email list (see #19) and good relationships within the EE department (see #8.2).

3. Build cool club projects

We collaborated with IEEE to create the “Hide and Seek” program. Imagine an easter egg hunt, but with low-power 80m beacons instead of easter eggs hidden throughout campus. Participants are given a small receiver which begins beeping within 30ft of a beacon. They find and keep the beacons which have various point values assigned to them based on their difficulty. This was a huge event for both W0EEE and IEEE, because not only could you participate for points to bid on things like XBox games and quadcopters, but also learn how to design, layout, procure, and solder the beacons and receivers together.

There’s tons of other stuff that’s out there to build, so my other recommendation is to have tools and an electronics workbench for members to use.

Full of surplus and hand-me-downs from the EE department labs, this fully-stocked Electronics workbench was super convenient to have.
Full of surplus and hand-me-downs from the EE department labs, this fully-stocked Electronics workbench was super convenient to have.

4. Be aggressive in seeking out potential members

#3 was a big draw for meetings. So was free pizza.

Free Pizza. The #1 attraction for college clubs.
Free Pizza. The #1 attraction for college clubs.

I took money out of my pocket to buy pizza for meetings and used personal print quota to print flyers for meetings and events. It was worth every penny to me. Costs were recouped eventually by paying myself back (keep your receipts!) from money gained through donations and membership costs. Which brings me to #20.

But first lets continue with W9WSW’s list:

5. Hold weekly open shack nights

YES.

Know one thing when holding meetings: consistency is KEY. Students are regimented individuals, who prey on consistency so they can efficiently schedule their busy lives.

5.5 Pick a good time to meet

For years W0EEE meetings/open shacks were at 7pm on Thursday, and like a contest station running CQ, this was our time to meet, which was not contested by other big clubs and teams. Eventually, a bigger station ran W0EEE off frequency, so the time had to be changed.

Use When2Meet to plan a time to meet if your current time isn’t working so well.

And if you have to cancel a meeting, don’t forget to let everyone know as soon as possible.

Bonus points for streaming your meeting (see #16).

6. Brand, brand, brand

Branding is important.

It helps to have an artist sometimes.

Branding is really important. And it’s easy to ignore it, thinking your totally awesome programming or events will make up for the lack of having logos and flyers.

A brand gives your organization a major edge in competing with other interests, aka, homework, studying, and other student organizations. It shows an essence of personality and professionalism.

A logo of our mascot, Joe Miner, was edited with permission long ago for use by the radio club. Unfortunately W0EEE doesn’t have a proper logo, though I tried to make one once in PowerPoint. It’s ugly as hell.

Oh god its hideous.
Oh god its hideous why did I do this.

How do you avoid having ugly logos? I suggest going to r/freedesign or fiverr and work with a professional. Otherwise, keep it simple!

msuhamradiologo-300x155
Like this.

Branding is not just logos. It’s keeping to the promise of the product you’re delivering. That product is an amateur radio experience. Having consistent meetings, participating and leading regular events, and staying true to your clubs mission is all part of that hook.

7. Get people licensed

This year W0EEE began a licensing class, and its in progress. It is one of the best moves to make

Until then, the Rolla Regional Amateur Radio Society (RRARS) held classes, and did test sessions about 5 or 6 times per year in the electrical engineering building on campus.

It also helps if you can subsidize the cost of licensing, and better yet incentivize it with free handheld radios, 1 year of free membership, or something entirely different. This comes at a cost though, and depends on what money your club has in the bank.

8. Make Connections

90% of knowledge is knowing the right people. And 90% of the time, your alumni are those people.

For example, here’s some notable people from Missouri S&T:

Knowing these guys have been immeasurably helpful in the revitalization of W0EEE, especially Ward since he always was willing to help and kept my motivation up with his impressive knowledge of ham radio and his deep understanding of the state of the hobby.

8.1 How to find your alumni

  1. Go through your university’s alumni department records.
  2. Go through any old HF logbooks you may have lying around
  3. Search QRZ. For example, search “<college name> site:www.QRZ.com” like this: https://www.google.com/search?q=rolla+site:www.qrz.com. Bam. TONS of alumni there.

8.2 Build relationships with the university – student funding, faculty, facilities, department chairs…

This should be #1. You won’t be able to install anything, do events with the university, promote meetings, order pizza, get roof access, get student funding, find avenues for equipment and monetary donations, and much much more if you don’t network.

A good piece of advice is to develop a rapport with your EE department chair. This can make or break a radio club, and in the case of CalPoly, really make the club and subsequently get HUNDREDS of students licensed through ham radio based curriculum. That’s awesome!

9. Create an endowment to provide ARRL memberships to student hams

I think this should go the other way – the ARRL should provide memberships to student hams by default. If Chick-fil-A can giveaway a free sandwich every Thursday with every meal, the ARRL can subsidize a handful of memberships for students. Perhaps lite memberships without QST, OR send extra copies of QST to the college radio club for students to read and give students members-only access privileges to the ARRL web.

10. Have a visible presence at campus events

W0EEE at Missouri S&T's fall MinerRAMA
W0EEE at Missouri S&T’s fall MinerRAMA

Every university has events for student organizations to show their stuff. Ours is called MinerRAMA outside in the Fall, and in the spring there are about five Preview, Registration and Orientation days (PRO days) which are a low-key version of MinerRAMA that takes place indoors.

On the table, we have our old sign, QSL cards, tons of radios and CW keys, our awards,one HF rig on and monitoring 14.300, and a tablet running SDR software or digital mode software, or WebSDR, and a tri-fold sign with a bunch of photos and information.

11. Put an APRS beacon on your mascot

This is creative! W0EEE’s never done this, but W8MSU has…we should try it!

12. Great clubs have great programming

 

W0EEE was heavily involved with IEEE and often did technology demos to dozens, sometimes hundreds of students. W9WSW’s text hits the nail on the head.

13. Repurpose recent ham magazines as giveaways

W0EEE has a lot of QSTs...this isn't even half of them.
W0EEE has a lot of QSTs…this isn’t even half of them.

W0EEE has a backlog of QSTs going back to the 80s and they’re for use by members to read, although we’re tempted to trash them all. What better way to get rid of them than through a giveaway? Although they’re not quite recent…so.

#9 tells you my opinion on how ARRL should approach student membership.

14. Setup a Remote Rig that students can check out

The easiest way to get students on the air is to direct them to WebSDR and now, the home of OpenWebRX, SDR.hu.

If your club has a PC-controlled HF station (better yet a FlexRadio), you should remote-ify it. This makes it fun and easy for members to play radio from the comfort of their dwelling. It’s pretty complicated to set this up, and you also need to worry about lightning protection and FCC regulations.

15. Create Special Events Stations

In other words, operate outside, and post it to your university events calendar. Don’t forget to get permission if needed. Typically, we discover we needed permission after the fact. It’s okay to beg for forgiveness 🙂

16. Stream your meetings

Heck yes!

My recommendation is to use Google Hangouts to allow people who don’t want to leave their room or alumni to join meetings, and have them posted to YouTube afterwards as a sort of digital trace of work done. This falls into #17 too.

17. Create a digital resource library

W0EEE has a google drive accessible by members, which contains all the meeting minutes, rosters, presentations, photos, documentation and manuals, logs, website information, design information, and more. Missouri S&T is closely integrated with Google Apps & Services, and it basically gives teams near unlimited storage. If you don’t have this, I recommend buying a Dropbox or Google Drive account for use, or if you’re handy, setting up a “shack server” if your IT department allows it.

18. Reach out to the ARRL

This falls under #8 too, especially since N0AX was a close advisor to the club and was directly connected with the ARRL. The league was quick to provide free promotional materials (flyers, pens, bookmarks, stickers, etc), licensing books, and handbooks. I went to Dayton one year, and they literally sent me off with a stack of books and said “Here. This is for W0EEE.”

 

Extra Stuff:

19. Keep Alumni Engaged

Alumni are a source of inspiration and motivation through expertise in both technical and historical fields. It’s hard to move forward when you walk into a room full of tens of thousands of dollars of ham radio equipment, all with various history, electrical modifications…and even then you might not know you have a storage outbuilding on someones farm somewhere, or club antennas installed on a tall TV tower dozens of miles away.

Alumni are also a primary source of help, both hands-on, like winning CW sweepstakes (thanks Ward), consultation, and most of all, funding.

20. Keep Costs Low

This goes without saying: because college students are cheap.

21. Be transparent

This is good advice for every endeavor. Being open, honest, and transparent allows for better relationships with members, faculty, the college, and alumni. This is done through regular newsletters, social media updates, lots of photos, and

22. Have a club repeater, and Echolink it, and run a net, and use it.

Our club has this, and we’re guilty of basically never being on it. This frustrates some people. Try to make it a priority to run a short weekly net, perhaps just after your regular club meetings. Be friendly too.

23. Don’t be afraid to ask for help from everyone

Speaking for all collegiate ham radio clubs, we alumni are eager to help in any way.

 

Amateur Radio in College Leading to a Career – A Testimonial

header

I got my extra-class license in 2007, at age 16. I studied for the tech, general and extra licenses in band class, in literature arts (where I also wrote a winning essay contest), and at every waking hour of my time away from school and other extra curricular activities.

I learned about trigonometrical impedance calculations (a.k.a. phasors), P-N junctions, oscillators, transistors, and some calculus and more all before my senior year of high school.

I applied for only a few colleges – Truman State and Missouri S&T (formerly University of Missouri – Rolla). Only one of these had a ham radio club. Can you guess which one I attended?

Missouri S&T(alone).bw

It was not until my junior year when I realized my college curriculum has taken me beyond the extra class license test. Although the classes were much greater in depth (and much more important for me to pass!), the Extra class license greatly prepared me for my studies in Electrical Engineering.

During my first week of college I joined the ham radio club, WØEEE. I spent all 4.5 years in an executive position, and taught myself circuit design and layout techniques and software, how to install a repeater (including a D-STAR repeater), and participated in contests, public service, and other clubs like IEEE, Solar Car, and the Mars Rover Design Team and the Satellite team where I designed telemetry and wireless networking systems.

Mars Rover electrical team and I making aggressive electrical modifications and repairs to Phoenix
Mars Rover electrical team and I making aggressive electrical modifications and repairs to Phoenix.
The 2014 Mars Rover "Phoenix" after having survived said modifications.
The 2014 Mars Rover “Phoenix” after having survived said modifications.

In my junior year, I was offered an internship at the Very Large Array Radio Observatory in New Mexico. I accepted, and spent 8 months there, installing antennas, studying RFI, learning about radio astronomy, and participating in the Socorro and New Mexico Tech amateur radio clubs. The Socorro, NM population is literally 10% hams, and the Radioshack is staffed by two hams and features a station behind the counter! See more of my VLA experience at my A Zero in Five Land blog.

741162_10200371203227932_1709984428_o

I participated in “SmartRock” research, which was to be a device that would record its position and movement underwater, and transmit that data back to the surface wirelessly – through up to 30 ft of water – to study and prevent erosion and scouring from destroying bridges. I studied all manner of ways to do this including ultrasonic, light, RF, and inductive coupling. I also was responsible for a power supply design using supercapacitors.

Then I got a job. I was accepted before I even graduated.

Over the last 5 years I’ve been in various roles in the aerospace industry, from a communication systems team that’s in charge of a huge number of avionics, including HF/VHF/UHF voice radios, to working on hardcore electrophysics and antenna design problems. The reason why I got this job, and the ones before it was that the experiences I had were listed on my resume. A resume-reading robot found the trigger word set for this particular requisition: ham radio.

Or maybe it was just radio…who knows, but as a part of the interview process, ham radio was mentioned a LOT.

My college and career goals was made possible by amateur radio, and that is the number one reason why I promote this hobby like I do. As a collective we are slowly realizing that ham radio is an excellent segway into a number of career fields (not always involving electrical engineering and radio), and there is huge potential energy in this hobby for young people, but there is not yet a person to push the ball down the hill.

That person may not be me, and it may not be just one person, so hopefully this story helps you understand the technical merits of ham radio and inspires you to be the energy in your radio club to do more for high school and college student amateur radio clubs.

%d bloggers like this: